Why I Stopped Choosing the Cheapest Option for Elevator Components and Handrails

Stefan Petrescu
Stefan Petrescu

Stefan Petrescu is a building climate-systems analyst specializing in air-conditioning equipment, heat pumps, ventilation units, ductwork, controls, boilers, fireplaces, stoves, and flue components. He uses ANSI/ASHRAE Standard 62.1-2025 ventilation criteria while comparing outdoor-air rate, airflow, static pressure, heating and cooling capacity, part-load efficiency, sound level, filtration, condensate control, combustion-air provision, and clearances. His application guides help mechanical engineers, installers, and owners size systems, verify interfaces, and balance comfort, indoor air quality, energy use, and serviceability.

The Real Cost Isn't on the Quote

There's a truth about purchasing that took me about four years to fully accept: the price you see on the quote is almost never the real price you pay. I'm not talking about freight or taxes. I'm talking about the costs that don't show up until a shipment arrives wrong, a certification is missing, or an installation fails inspection. And this hits hardest with elevator components, handrail systems, and building metal products.

I've been the office administrator for a 180-person company since 2021. I manage all the indirect materials spending—roughly $420,000 annually across nine vendors for different needs. I report to both operations and finance, so I'm stuck in the middle: operations wants things fast, finance wants things cheap, and I'm the one signing the purchase orders. For my first year on the job, I was a die-hard "lowest unit price wins" kind of buyer. Whatever kept the line item down was fine by me.

Then I started looking behind the purchase orders. And I'm not going back.

Argument 1: Elevator Components OEM and the Hidden Certification Trap

Let's start with elevator components OEM. We maintain three buildings on our campus, and we swap out around 40 elevator parts a year—rollers, guides, door operators, the usual wear items. In 2022, I was buying from a third-party distributor who claimed their parts were OEM-equivalent. Their quote came in about 12% lower per unit than what we'd seen from mcnichols. I was pretty pleased with myself.

That summer, our elevator maintenance contractor pulled a guide roller during a routine service and refused to put it back. The part we'd sourced didn't have a traceable batch number or a material cert. Just a one-page PDF with a generic "OEM" stamp. Our contractor said they couldn't install it and handed it back. We had to reorder through another vendor, pay expedited freight, and eat a half-day of elevator downtime in a building with over 100 people working in it.

Total damage: about $1,180 to save around $400. That's the kind of trade I've stopped making.

I later pulled up the FTC's business guidance on advertising and marketing—March 2024 update, if I remember correctly—which requires substantiation for claims like "meets OEM specifications" or "certified to ASTM X." Basically: if a supplier is making claims about standards or quality, they need evidence, not just a PDF with a few random numbers on it. We'd never asked for that evidence. We just compared prices and clicked "order."

Argument 2: Handrail Systems Private Label — A Faster Path to a Bigger Problem

Handrail systems private label is one of those areas where everyone thinks they're getting a deal. We had a project in early 2023 where we sourced a private-label handrail package through a general fabricator. The quoted price per linear foot was competitive, everything looked fine on paper. We installed it in a two-story administrative building.

Five months later, the powder coating started chalking on two flights. Not just faded—chalking, like you could wipe the finish off with your thumb. Our client flagged it during a walkthrough and asked for it to be corrected. That's when I dug into the specs and realized the coating standard we'd received didn't meet the ASTM requirement our client's design team had specified.

We had to tear out the first two flights and re-install with material from a different supplier. Materials cost for the original order was $2,400. Total cost for the remediation—material, labor, and the downtime we caused the facility team—was $7,300. The fabricator did credit us for the material. They didn't pay for the re-installation labor or the scheduling headache.

From the outside, it looked like that private-label quote was just a slightly better deal. The reality is the vendor wasn't holding themselves to the same documentation standard as their name-brand counterparts, and we didn't check.

Argument 3: Grating Systems and the Surface Illusion

This one stings a little when I think about it. We used to buy a low-end substitute for mcnichols plank grating because the per-pound price looked about 18% better. It was used as walkway coverage on one of our mezzanine levels—nothing crazy, just a standard duty application.

What we missed was the galvanized coating thickness. The product we bought had a coating that was less than half the thickness our maintenance team's spec required. Six months after installation, the grating in the dampest corner of that mezzanine started showing surface rust. Our safety officer flagged it immediately and said to replace it.

The replacement cost—material and labor for roughly 120 linear feet—was $5,600. That's not far off from what we would've paid for mcnichols steel grating in the first place. But here's the part that bugs me: the actual price difference between the two products, on the original order, was about $1,100. I saved $1,100 to spend $5,600 fixing a problem.

I tell this story because it's the clearest example I have of why I changed my approach.

When I looked back at the invoices, I realized the "cheaper" grating wasn't even that much cheaper once you accounted for the fact that we ordered it twice. My gut told me to double-check the specs before we ordered, but the numbers on the quote page looked so good that I ignored it. Every spreadsheet analysis pointed to the budget option. Something felt off about the fact that the vendor couldn't answer a single question about adhesion standards. Turns out that "slow to respond and vague on compliance" was a preview of "rusts in six months."

What About the Cost of Switching?

I'll be straight with you: I went back and forth between the cheap supplier and a more established one for about three weeks—four, actually, if I count the two rounds of revised quotes. The cheap one offered savings of roughly $1,400 across the next quarter. The established one had full material certs, batch traceability, and a documented response time of two business days for technical questions.

On paper, the cheap option made sense. But my gut kept screaming that we'd lose too much time and control if something went wrong. I went with the established vendor. And I'm glad I did—we caught a batch inconsistency six weeks later that would've been a nightmare to trace through the cheaper supply chain.

Now, don't get me wrong. I'm not saying price doesn't matter. I track every line item against budget, and I still push back when a quote feels inflated. I'm also not saying every budget supplier is hiding something—we have a regional distributor who does honest work at fair prices.

But if you're the one managing elevator components wholesale cost guide decisions or sourcing private-label handrail systems, here's what I'd tell you: the per-unit cost on the quote sheet is one thin slice of the actual cost. It doesn't include the cost of the documentation you're going to have to chase down later. It doesn't include the freight you pay to ship the problem back. It doesn't include the two extra days of labor when the install doesn't go as planned, or the rush fees you'll pay to get a replacement in time.

I learned that one the hard way when a different order went sideways. We paid an extra $340 just on rush freight and another $180 for a "re-handling" fee the vendor never mentioned upfront. Those little charges stack up fast. If you want a reference point, even in the commercial printing world, rush fees typically run 50-100% over standard pricing, and re-setup charges aren't absorbed by the vendor. Custom metal and hardware suppliers operate on similar logic—you pay for the convenience when you didn't plan ahead.

Here's What I Do Now

So here's my advice, and I say it as someone who had to learn this the expensive way: before you compare prices, write down what "cost" is going to include. Then put the same number in every column.

I made a simple scorecard for our metal products—grating, handrail, elevator parts, structural steel. It has five columns: unit cost, freight cost, lead time, documentation (certs, traceability), and replacement/return terms. Every vendor gets scored the same way. I don't look at "lowest unit price" anymore. I look at which row has the fewest red flags across all five columns. It takes maybe 20 minutes per quote. That's a lot less than the three days it took to sort out the elevator roller issue.

If you're sourcing mcnichols products, read their spec sheets carefully. They list actual material standards, finish options, and load ratings in a format that lets you compare apples to apples. That's a huge help if you're trying to build any kind of total cost picture. We've used their spec documentation as the benchmark for other quotes, and it's made the comparison process faster and less error-prone.

Last year, we saved $6,400 on elevator components and another $14,000 on structural steel and grating just by doing this consistently. Not because we switched to the cheapest option—because we stopped treating "cheapest" and "best" as the same thing.

If you've ever had a vendor deliver something that didn't match the spec but was "too good a price to pass up," you know exactly what I'm talking about. The numbers look great on the quote. The fix never does.